Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Screw in and tighten new ATF drain plug. → Tightening torque: 15 Nm (11 ft. lb.) +3 Nm (+2 ft. lb.)
- Fill in ATF.
→ 370255 CHANGING ATF - section on "Filling"
- Check and top up ATF.
- Install underbody panelling.
→ 519419 REMOVING AND INSTALLING REAR COVER - section on "Installing"