Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install cardan shaft. → 390219 REMOVING AND INSTALLING CARDAN SHAFT - section on "Installing"
- Calibrate the Porsche Doppelkupplung control unit and erase the fault memory.
PIWIS Tester II 9818
- Check ATF and oil for final drive and top up if necessary.
- Adjust the parking lock cable. See INSTALLING PARKING LOCK CABLE . → 371319 REMOVING AND INSTALLING PARKING LOCK CABLE
- Install underbody panelling.
→ 519319 REMOVING AND INSTALLING CENTRE COVER - section on "Installing" → 519419 REMOVING AND INSTALLING REAR COVER - section on "Installing"
- Connect the battery.