LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (37 - Automatic Transmission - Actuation, Ass. Housing -- CARRERA (997)) >> WM 371519 Removing And Installing Selector Lever Cable (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fasten parking-brake lever. → 466119 REMOVING AND INSTALLING PARKING-BRAKE LEVER  - section on "Installing"
  2. Install center console. → 681719 REMOVING AND INSTALLING CENTRE CONSOLE - section on "Installing"
  3. Install selector knob. → 370419 REMOVING AND INSTALLING SELECTOR KNOB  - section on "Installing"
  4. Install underbody panel. → 519319 REMOVING AND INSTALLING CENTRE UNDERBODY PANEL - section on "Installing"→ 519419 REMOVING AND INSTALLING REAR COVER - section on "Installing"
  5. Lower the vehicle.
  6. Switch through all transmission ranges and check operation.