LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (37 - Automatic Transmission - Actuation, Ass. Housing -- CARRERA (997)) >> WM 371319 Removing And Installing Parking Lock Cable (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4 S CABRIO, CARR. 4S Coupe, Turbo CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO, Speedster, Turbo S Coupe, Turbo S CABRIO, CARRERA 4 GTS & CARRERA 4 GTS CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move selector lever to position P.
  2. Raise the vehicle at the prescribed jacking points.

    → 400000 LIFTING THE VEHICLE

  3. Remove selector knob.

    → 370419 REMOVING AND INSTALLING HANDLE - section on "Removing"

  4. Remove center console.

    → 681719 REMOVING AND INSTALLING CENTRE CONSOLE - section on "Removing"

  5. Remove handbrake lever.

    → 466119 REMOVING AND INSTALLING HANDBRAKE LEVER - section on "Removing"

  6. Remove underbody panelling.

    → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY - section on "Removing"

    → 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY - section on "Removing"