Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Unscrew Connection Hose 95071 from ATF - charging valve.
- Replace sealing ring for cap nut and screw on cap nut. → Tightening torque: 40 Nm (30 ft. lb.)
- Replace sealing ring for ATF control screw and screw in ATF control screw. → Tightening torque: 22 Nm (16 ft. lb.)
- Fit underbody panels. → WM 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY - installing
- Lower the vehicle.