Preliminary Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
To ensure that the transmission is filled correctly, the vehicle must be horizontal on the lifting platform.
- Raise the vehicle at the prescribed jacking points.
- Remove underbody panelling.
→ WM 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY - section on "Removing"
- Place oil collection pan under the transmission.