Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove air cleaner housing.
→ 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .
Release drive belt.
→ 137819 REMOVING AND INSTALLING DRIVE BELT .
Remove rear silencer.
→ 263319 REMOVING AND INSTALLING REAR SILENCER - GT3 .
WARNING:
Danger of objects or loads falling down
- Risk of squashing or crushing
→ Secure components to prevent them from falling down.
Lower the engine.
1. 4.1. Support the engine using engine retainer plate 9111/3 in conjunction with support plate 9111/4 and adapter 9111/1 .
2. 4.2. Loosen and unscrew M12 collar nuts on the engine mounting.
3. 4.3. Slowly lower the engine until the converted counter-hold tool retaining device 9732/1 fits into the pulley.