LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)) >> WM 137419 Removing And Installing Crankshaft Sealing Ring - Belt Side (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of objects or loads falling down
  • Risk of squashing or crushing

→ Secure components to prevent them from falling down.

  1. Install vibration balancer.

    → 137619 REMOVING AND INSTALLING PULLEY (BALANCER) .

    → 137519 REMOVING AND INSTALLING VIBRATION DAMPER - TURBO .

  2. Install engine carrier.

    → Installation .

    → Installing Engine Carrier - Turbo .

  3. Install silencer

    Naturally aspirated engine:  → Installing Front Silencer .

    Turbo engine:  → Installing Rear Silencer - Turbo .

scientia non olet · About LEMON Manuals