Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Subsequent work for cylinder bank 1-3:
1. 1.1. Install heat shield on catalytic converter (cylinder bank --13).
  → 635019 REMOVING AND INSTALLING REAR BUMPER .
2. 1.2. Install charge air cooler.
  → 214319 REMOVING AND INSTALLING CHARGE-AIR COOLER .
3. 1.3. Install rear apron.
  → 635519 REMOVING AND INSTALLING REAR APRON .
Subsequent work for cylinder bank 4-6:
1. 2.1. Install tailpipe cover on cylinder bank 4-6.
  → 263519 REMOVING AND INSTALLING TAILPIPE COVER - TURBO .