LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (19 - Engine - Cooling -- CARRERA (997)) >> WM 197019 Removing And Installing Radiator (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure air-conditioning condenser on the side radiator.
    1. 1.1. Insert air-conditioning condenser into the side brackets.
    2. 1.2. Screw in and tighten one tapping screw between the air-conditioning condenser and side radiator.
  2. Install the air guide in front of the radiators.

    → 192419 REMOVING AND INSTALLING AIR GUIDE  - section on "Installing"

  3. Fill in coolant.

    → 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING)  - section on "Filling"

  4. Install the front apron.

    → 631519 REMOVING AND INSTALLING FRONT APRON - section on "Installing"

  5. Install front wheel housing liners.

    → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER - section on "Installing"

  6. Install front wheels.

    Use special tool socket-wrench insert P300  to install the front wheels.

    → 44051900 REMOVING AND INSTALLING WHEEL - section on "Installing".

scientia non olet · About LEMON Manuals