Installing Coolant Distributor Housing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install coolant distributor housing.
Information
- Replace O-rings.
- Grease O-rings with a light coating of Kluber Syntheso Glep (Part No.: 000.043.204.68).
1. 1.1. Replace sealing rings -6 and 7- .
2. 1.2. Fit coolant distributor housing and press it into the joining socket.
  
  Fig 1: Overview Of Coolant Distributor Housing
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. 1 - Coolant distributor housing
  2. 4 - Screw
  3. 5 - Screw
  4. 6 - Sealing ring
  5. 7 - Sealing ring
  6. 8 - Sealing ring
Install oil return lines.
→ 217820 REMOVING AND INSTALLING OIL RETURN LINE .
1. 2.1. Install oil return line 4-6.
  
  Fig 2: Identifying Oil Return Line (4-6)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 2.2. Install oil return line 1-3.
  
  Fig 3: Identifying Oil Return Line (1-3)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install engine carrier.
→ 103019 REMOVING AND INSTALLING ENGINE CARRIER .
1. 3.1. Support the engine with a transmission jack and Retainer Plate 9592 .
  → Tightening torque: 85 Nm (63 ft. lb.)
  
  → Tightening torque: 65 Nm (48 ft. lb.)
  
  Fig 4: Identifying Engine Carrier Components
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Information
- Replace O-rings.
- Grease O-rings with a light coating of Kluber Syntheso Glep (Part No.: 000.043.204.68).
Install unit carrier.
1. 4.1. Replace all sealing rings.
  
  Fig 5: Identifying Unit Carrier Sealing Rings
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 4.2. Fit unit carrier -2- and screw in and tighten screws.
3. 4.3. Position coolant flange -5- and screw in and tighten screws -3- .
  → Tightening torque: 10 Nm (7.5 ft. lb.)
4. 4.4. Screw in and tighten screw -4- on cable rail.
  → Tightening torque: 10 Nm (7.5 ft. lb.)
  
  Fig 6: Identifying Unit Carrier Components
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.