LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (19 - Engine - Cooling -- CARRERA (997)) >> WM 193817 Draining And Filling Coolant (Includes Bleeding) (Gt2, Gt3 & Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check coolant line connections and hoses for leaks.
  2. Completely install rear underbody panelling.

    → 519419 REMOVING AND INSTALLING REAR COVER - Installing.

  3. Test-drive the vehicle.
    1. 3.1. Following the test drive and when the engine is still at operating temperature, accelerate to approx. 6, 000 RPM a number of times at idle speed in order to fully ventilate the system.
  4. Check the fluid level with the aid of the markings on the reservoir. Correct the coolant level after the engine has cooled if necessary.
scientia non olet · About LEMON Manuals