LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 619037 Disassembling And Assembling Hood Compartment Lid (CABRIO Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove hood compartment lid. → 619019 REMOVING AND INSTALLING HOOD COMPARTMENT LID  - section on "Removing"
  2. Remove wire harness for hood compartment lid. → WM 972519 REMOVING AND INSTALLING REAR WIRE HARNESS - section on "Removing" 
  3. Remove SDARS antenna. → WM 913819 REMOVING AND INSTALLING SDARS ANTENNA (EXCEPT 911 TURBO S COUPE "ED. 918 SPYDER", 911 CARRERA 4 GTS, 911 TURBO S CABRIO "ED. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 GT3 RS 4.0) - section on "Removing" 
scientia non olet · About LEMON Manuals