Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Adjust hood compartment lid.
- 1.1. End hood service position. → 6101IN HOOD SERVICE POSITION
- 1.2. Check contours with respect to the side panels, the hood and the rear lid. → 5000IN DIAGRAM - BODY GAP DIMENSIONS
- 1.3. Move hood to service position.
- 1.4. Loosen fastening nuts on hood compartment lid.
- 1.5. Move the hood compartment lid at the hinges to adjust the contours, adjust the hinges if necessary. → 619215 ADJUSTING HINGE FOR HOOD COMPARTMENT LID - section on "Adjusting"
- 1.6. Screw down fastening nuts on hood compartment lid. → Tightening torque: 9.7 Nm (7 ft. lb.)
- 1.7. End hood service position and check contours.