Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

End service position. → 6101IN IN -CONVERTIBLE TOP IN SERVICE POSITION
Check gap dimensions for convertible top, adjust if necessary.→ WM 5X00IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)
Information

Only for vehicles with hardtop.
Install hardtop. → 610219 REMOVING AND INSTALLING HARDTOP - section on "Installing"
Information

Only for vehicles with hardtop.
Adjust hardtop. → 610215 ADJUSTING HARDTOP - section on "Adjusting"

Information

Only for removing/installing or replacing convertible-top peg mount.

Install sun visor. → WM 682319 REMOVING AND INSTALLING SUN VISOR (EXCEPT TURBO S COUPE "ED. 918 SPYDER", CARRERA 4 GTS, TARGA 4, TARGA 4S, TURBO S CABRIO "ED. 918 SPYDER", CARRERA 4 GTS CABRIO, SPEEDSTER, GT3 RS 4.0) - section on "Installing"