LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (27 - Starter, Power Supply, Cruise Control -- CARRERA (997)) >> WM 272219 Removing And Installing Generator (Except 911 Turbo Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. → Disconnecting And Connecting The Battery 
  2. Remove air cleaner housing. → REMOVING AIR CLEANER HOUSING
  3. Release drive belt. → REMOVAL

    Information 

    The pulley on the hydraulic pump can become damaged when you remove the generator.

    • The pulley on the hydraulic pump must be removed. 
  4. Remove pulley on hydraulic pump. → 489819 REMOVING AND INSTALLING HYDRAULIC PUMP
scientia non olet · About LEMON Manuals