LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Air Conditioner - 911 CARRERA (996)) >> Removing and installing the expansion valve >> Installation

Removing and installing the expansion valve: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Do not remove plugs until shortly before installation. Replace O-rings and wet the new rings with refrigerant oil.
  2. Refrigerant oil removed from a previously run air-conditioning system may no longer be used (special-category waste).

Tightening torques: 

TIGHTENING TORQUES - EXPANSION VALVE

Screw M5 6 Nm (4.5 ftlb)
Screw M6 9 Nm (6.5 ftlb)
scientia non olet · About LEMON Manuals