Removing and installing pressure switch for the air-conditioning system: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cover above the heating/air-conditioning system.
Remove the refrigerant by suction using the service unit.
Pull off the cable plug on the pressure switch.

Fig 1: Pulling Off Cable Plug On Pressure Switch
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Undo and unscrew the pressure switch.