Removing and installing pressure switch for the air-conditioning system: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the O-ring on the pressure switch and wet it with refrigerant oil. Tightening torque: 3 N.m (2 ft.lb)
- Refrigerant oil removed from a previously run air-conditioning system may no longer be used (special-category waste).