LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Air Conditioner - 911 CARRERA (996)) >> Removing and installing outside temperature sensor >> Installation

Removing and installing outside temperature sensor: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place temperature sensor on the intake duct and turn by 90 (tighten).
  2. Engage electrical plug connection and route wire carefully.
  3. Install drive motor for fresh-air/recirculation valve and perform a function test.
scientia non olet · About LEMON Manuals