LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Air Conditioner - 911 CARRERA (996)) >> Removing and installing drive motors of the heating/air-conditioning unit >> Removal

Removing and installing drive motors of the heating/air-conditioning unit: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove footwell bulkhead and air guides. Unclip centre console cover at the front and remove the footwell vent (3 screws).
  2. Press pivot pin on the adjusting lever together and disengage the deflection lever.
  3. Unscrew drive motor of the heating/air-conditioning unit and disconnect the electrical plug connection.
scientia non olet · About LEMON Manuals