LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Air Conditioner - 911 CARRERA (996)) >> Removing and installing compressor - GT3 >> Running-in regulations for new compressor

Running-in regulations for new compressor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Fill the air-conditioning system (fluid) via the high-pressure side from the refrigerant circuit with the engine "OFF".
  1. If possible, all air outlet nozzles "OPEN", circulating air "CLOSED".
  2. Start the engine and allow idle speed to stabilize (approx. 5 seconds).
  3. Set the fan to max. output.
  4. Switch on the air-conditioning system (AC switch) and allow it to run uninterrupted for at least 2 minutes at 1500 rpm.
  5. After 2 minutes uninterrupted compressor operation time, the oil distribution in the air-conditioning system is completed and the compressor can be run up to the max. engine speed.
scientia non olet · About LEMON Manuals