LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Air Conditioner - 911 CARRERA (996)) >> Removing and installing blower driver >> Installation

Removing and installing blower driver: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engage the electrical plug connection and slide the blower driver into the upper bracket.
  2. Tighten fastening screw carefully (plastic housing). Install the air guide and footwell bulkhead.
  3. Perform function test on heater/fresh-air blower motor.
scientia non olet · About LEMON Manuals