LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Air Conditioner - 911 CARRERA (996)) >> Removing and Installing drive motor for fresh-air/recirculation valve >> Installation

Removing and Installing drive motor for fresh-air/recirculation valve: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. The removal or installation position of the drive motor and fresh-air/recirculation valve cannot be changed.
  2. Ensure that the deflection lever of the outside-air valve is seated correctly.
  3. Tighten fastening screw carefully (plastic housing).
  4. Engage electrical plug connection and route wire carefully.
  5. Perform a function test after installation.
scientia non olet · About LEMON Manuals