LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- 911 CARRERA (991) >> WM 138219 Removing And Installing TENSIONING Roller For Drive Belt (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Installing Tensioning Roller

Installing Tensioning Roller

  1. Fit tensioning roller with screw.
    1. 1.1. Tighten the screw using the specified tool.

      → Tightening torque: 23 Nm (17 ftlb.) 

  2. Fit protection cap.
  3. Fit and tension the drive belt.

    → INSTALLING DRIVE BELT  .

scientia non olet · About LEMON Manuals