Installing Front Spoiler (Pneumatics)

Information 

Air hoses are color-coded and must not be interchanged.

Observe marking for insertion depth of hose connection.

Hoses must not be kinked.

Information 

Check that none of the fastening clips are deformed or broken.

Replace missing or damaged clips with new clips.

Make sure that all fastening clips are engaged securely.

Make sure that all cables and hoses are engaged securely in the brackets.

1. Installation is performed in reverse order to removal.
2. Tighten fastening screws to the specified tightening torque Tightening torque 2.5 Nm (2 ftlb.)  until secure.
3. Install front apron. → Installing Front Apron