Installing Front Apron
- Installation is performed in reverse order to removal.
- Secure the front apron at the top using the fastening screws and a Torque Screwdriver Nr. 89 Pos. 5 Tightening Torque 3.2 Nm (2 ft. lbs.) +/-0.6 Nm (+/-0.5 ft. lbs.)
- Tighten fastening screws at the sides of the front apron. Torque Screwdriver Nr. 89 Pos. 5 Tightening Torque 3.2 Nm (2 ft. lbs.) +/-0.6 Nm (+/-0.5 ft. lbs.)
- Connect hose connection for front spoiler (pneumatics).
- Secure the front apron underneath with the fastening screws. Torque Screwdriver Nr. 89 Pos. 5 Tightening Torque 3.2 Nm (2 ft. lbs.) +/-0.6 Nm (+/-0.5 ft. lbs.)
- Check gap dimensions at the front lid, wing and headlights. Loosen fastening screws if necessary and adjust gap dimensions by moving the front apron.