Subsequent Work
- Plug in electric plug connection for locking mechanism for backrests at the left and right until it engages securely.→ REMOVING LOCK FOR REAR-SEAT BACKREST
- Plug in electric plug connection for head airbag unit at the left and right until it engages securely.→ INSTALLING HEAD AIRBAG
- Plug in electric plug connection for rear three-point belt at the left and right until it engages securely.→ INSTALLING FRONT THREE-POINT BELT
- Install PASM control unit and holder.→ INSTALLING PASM CONTROL UNIT
- Plug in electric plug connection for PASM until it engages securely.
- Install TPM control unit and holder.→ INSTALLING CONTROL UNIT FOR TIRE PRESSURE MONITORING (TPM)
- Install control unit for parking brake. → INSTALLING CONTROL UNIT FOR ELECTRIC PARKING BRAKE
- Install rear apron. → INSTALLING REAR APRON
- Plug in electric plug connection for control unit for rear-end electronics until it engages securely.→ INSTALLING CONTROL UNIT FOR REAR CONVENIENCE SYSTEMS
- Install control unit for trailer hitch.→ INSTALLING TRAILER HITCH CONTROL UNIT
- Plug in electric plug connection for trailer hitch until it engages securely.
- Install tail light.→ INSTALLING TAIL LIGHT
- Fit fuse box in luggage compartment.→ 978409 LOOSENING AND SECURING FUSE BOX
- Install power distributor (HSB). → Installing Power Distributor (HSB)
- Make sure that all electric plug connections are plugged in and locked on the main wire harness in the luggage compartment.
- Install trim panel and sound absorber for luggage compartment.
→ INSTALLING TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER) AT THE LOCK SUPPORT
→ INSTALLING CENTRE TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER)
→ INSTALLING CENTRE TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER)
- Install the battery.
- → 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .