LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 404119 Removing And Installing Front Drive Shaft >> Subsequent Work >> Subsequent Work For Removing And Installing Front Drive Shaft

Subsequent Work For Removing And Installing Front Drive Shaft

WARNING: This page is about a different variant/trim than selected.
  1. Fit connecting link.

    > 407819 Removing and installing front connecting link - section on "INSTALLING "

  2. For 19-inch brake system:

    Fit air guide.

    > 407719 Removing and installing anti-roll bar - section on "INSTALLING "

  3. Fit lock nut for the drive shaft.

    > Refer to the appropriate Tightening Torques For Front Axle service information

  4. Fit hub cap.