Removing Transmission Control Unit

WARNING: This page is about a different variant/trim than selected.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work.
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
Do not touch electric pins and plug contacts.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of control unit

NOTE: Voltage peaks

Fill the carpet at the left to the side.
Release electric plug connection -1- (-a- ) and unplug it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unplugging connector for transmission control unit
Unscrew the fastening screw -2- on the control unit.
Pull the transmission control unit -3- out of the guides -4- and remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing transmission control unit