LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (37 - Automatic Transmission - Actuator, Housing (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 371519 Removing And Installing Selector Lever Cable >> Removing Selector Lever Cable

Removing Selector Lever Cable

WARNING: This page is about a different variant/trim than selected.
  1. Pull the tab washer -1-  off the selector lever cable -A-  .
    G16317461Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Releasing selector lever cable from transmission

  2. Pull the selector lever cable -2-  off the ball joint using > VAS 6933 - Disassembly tool  (-B-  ).
  3. Remove selector support.

    > 370819 Removing and installing selector support - section on  "REMOVING "

  4. Carefully pull the selector lever cable -1-  together with the rubber sleeve -2-  out of the centre tunnel -A-  .
    G16317462Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing rubber sleeve from selector lever cable

scientia non olet · About LEMON Manuals