LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (37 - Automatic Transmission - Actuator, Housing (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 370819 Removing And Installing Selector Support >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Adjust selector lever cable.

    > 371515 ADJUSTING SELECTOR LEVER CABLE 

  2. Install switch console.

    >WM 962719 REMOVING AND INSTALLING SWITCH CONSOLE (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

  3. Install selector knob.

    > 370419 REMOVING AND INSTALLING SELECTOR KNOB 

  4. Install centre console cover at the top and bottom.

    > WM 681919 REMOVING AND INSTALLING CENTRE CONSOLE COVER (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

  5. Install PCM 3.1 display and operator control unit.

    > WM 911019 REMOVING AND INSTALLING PCM DISPLAY AND OPERATOR CONTROL UNIT (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S HYBRID, CAYENNE S E, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

  6. Install centre air vents at the left and right.

    > WM 855319 REMOVING AND INSTALLING CENTRE AIR NOZZLE (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

scientia non olet · About LEMON Manuals