LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 48 (46 - Brakes - Brake Mechanism (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 468519 Removing And Installing Spreader Device >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove wheel.

    > 440519 Removing and installing wheel - section on "REMOVING "

  2. Move electric parking brake (EPB) into >> installation position << using the Porsche System Tester. To do this, select >> Parking brake << in the control unit overview. Select >> Drive links/checks << >> All << >> Move to installation position <<.
  3. Remove brake calliper and hang it at a suitable place in the wheel arch.

    > 474119 Removing and installing rear brake calliper - section on "REMOVING "

  4. Remove brake disc.

    > 465419 Removing and installing rear brake disc (PCCB) - section on "REMOVING "

  5. Remove brake shoes.

    > 468356 Replacing brake shoes - section on "REMOVING "