LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (42 - Rear Wheel Suspension Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 420119 Removing And Installing Rear Axle >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Fit rear wheels.

    > 440519 Removing and installing wheel - section on "INSTALLING "

  2. Install exhaust system.

    > 260119 Removing and installing exhaust system - section on "INSTALLING "

  3. Bleed the PDCC system.

    > 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)

  4. Perform suspension alignment.

    > 449503 SUSPENSION ALIGNMENT, COMPLETE

  5. Calibrate the steering-angle sensor.

    > 456005 INITIALISING AND CALIBRATING STEERING-ANGLE SENSOR