LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (40 - Wheel Suspension Front Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 404119 Removing And Installing Front Drive Shaft >> Subsequent Work >> Subsequent Work For Removing And Installing Front Drive Shaft

Subsequent Work For Removing And Installing Front Drive Shaft

WARNING: This page is about a different variant/trim than selected.
  1. Install connecting link.

    > 407819 Removing and installing front connecting link - section on "INSTALLING "

  2. If installed: 

    Install air guide.

    >407719 REMOVING AND INSTALLING ANTI-ROLL BAR 

    >407719 REMOVING AND INSTALLING FRONT ANTI-ROLL BAR (PDCC) 

  3. Tighten the lock nut for the drive shaft. > Tightening torque 460 (340 ftlb.) Nm  --
  4. Install hub caps.
scientia non olet · About LEMON Manuals