LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 341219 Removing And Installing Shift And Selector Cables (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Locking bridge P 9619/1  must be removed.
    Fig 1: Removing Locking Bridge
    G09586662Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install handbrake lever.

    → INSTALLING PARKING-BRAKE LEVER

  3. Install rear wall cover.

    → INSTALLING REAR WALL COVER

  4. Install engine compartment lid.

    → INSTALLING ENGINE COMPARTMENT LID

  5. Install shift lever knob.

    → Installing Shift Lever Knob 

  6. Install Centre console.

    → INSTALLING CENTRE CONSOLE

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals