LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 46 - Brakes - Brake Mechanics -- 987-BOXSTER-CAYMAN >> WM 466119 Removing And Installing Parking-Brake Lever (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Installing Parking-Brake Lever

Installing Parking-Brake Lever

  1. Install parking-brake lever -1-  . Use new fastening nuts -4-  and tighten them to 23 Nm (17 ftlb.).
    Fig 1: Identifying Parking-Brake Lever Mounting Point
    G09587867Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Engage brake cable -5-  . Connect plug to switch -3-  .
  3. Remove lock pin on mounting saddle if necessary (only fitted on new parking-brake levers/used to prevent automatic readjustment of the parking-brake cable).
  4. Tighten and loosen the parking-brake lever a number of times (due to automatic readjustment of the parking-brake cable). Then check the free play of the parking-brake lever. If there is too much free play, adjust the parking-brake shoes.

    Check the free play of the parking-brake lever (permissible value) and adjustment specification of the parking brake shoes, see → 468316 ADJUSTING THE PARKING-BRAKE SHOES .

scientia non olet · About LEMON Manuals