Subsequent Work
- Install holder unit (drive mechanism). → Removing Holder Unit (Drive Mechanism)
- Install wire harness for roof assembly. → INSTALLING WIRE HARNESS FOR CONVERTIBLE TOP
- Install frame for sunroof cover. → Installing Frame For Sliding Roof
- Install air deflector. → Installing Air Deflector
- Install microswitch for closing the sunroof. → Replacing Microswitch For Closing The Sunroof
- Install motor for sunroof at the left and right. → Installing Electric Motor For Sunroof
- Install closing aid. → INSTALLING CLOSING AID
- Install wiper motor for rear window washer. → INSTALLING WIPER MOTOR FOR REAR WINDOW WASHER
- Connect roof assembly and vehicle using an adapter cable 9758 .
- Adjust microswitch for closing the sunroof. → Adjusting Microswitch For Closing The Sunroof
- Carry out a function test from the vehicle using the adapter cable 9758 .
- Connect PIWIS Tester 9718 and read out fault memory; erase the fault memory if necessary.
- Install roof assembly. → Installing Roof Module