LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayman Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 66 - Exterior Equipment -- 987-BOXSTER-CAYMAN >> WM 665619 Removing And Installing Side Air Inlet (Except BOXSTER S Black Edition) >> Removing Inner Air Guide >> Removing Flow Duct On The Right

Removing Flow Duct On The Right

  1. Remove coolant reservoir. → REMOVING COOLANT TANK
  2. Remove engine-compartment blower. → REMOVAL
  3. Remove air guide and air scoop.
    1. 3.1. Unscrew fastening screws -1-  and remove air guide -2-  .
    2. 3.2. Unscrew fastening screws -1-  and remove air scoop -3-  .
    3. 3.3. Check fastening nut -4-  and replace if necessary.
      Fig 1: Removing Air Guide And Scoop
      G09591035Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Disconnect plug connections.
    1. 4.1. Pull off temperature sensor -1-  and set it aside.
    2. 4.2. Pull off plug connection for oil pressure switch -2-  .
      Fig 2: Removing Oil Pressure Switch Plug Connections
      G09591036Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Remove flow duct.
    1. 5.1. Pull flow duct up and off.
      Fig 3: Removing Flow Duct
      G09591037Courtesy of PORSCHE CARS NORTH AMERICA, INC.