LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons >> WM 137619 Removing And Installing Vibration Balancer (Crankshaft Pulley) On V6 DFI Engines (Cayenne Tip, Cayenne Man) >> Preliminary Work

Preliminary Work

  1. Put on protective covers.
  2. Remove fan frame. → Removing Cooling Fan Housing (Radiator Frame)
  3. Remove cowl for throttle body. → Removing Air Box For Throttle Housing (Intake Pipe Upstream Of Throttle Valve)
  4. Mark rolling direction of drive belt with chalk and remove drive belt from the vibration balancer. → Removing And Installing Drive Belt 

    Pfeil  - Rolling direction of drive belt

    Fig 1: Identifying Rolling Direction Of Drive Belt
    G09409054Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals