LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 24 - Fuel System - Electronic Ignition >> WM 246919 Removing And Installing Oxygen Sensors Ahead Of Catalytic Converter On DFI Engines >> Preliminary Work

Preliminary Work

  1. Raise the bonnet. Move bonnet to service position using bonnet stay 9704. 
  2. Put on the protection covers.
  3. Remove engine compartment trim panels on the right. → Removing front trim (engine compartment)
scientia non olet · About LEMON Manuals