LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling >> WM 195019 Removing And Installing Coolant Pump On DFI Engines (Except Cayenne Diesel, Cayenne S TRANSSYBERIA Tip, Cayenne TRANSSYBERIA Man, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Subsequent Work

Subsequent Work

  1. Fit drive belt. → Removing and installing drive belt
  2. Install intake manifold. → Installing air box for throttle housing (intake pipe upstream of throttle valve)
  3. Fill and bleed the cooling system according to instructions. → Filling The Cooling System (Includes Bleeding) 
scientia non olet · About LEMON Manuals