LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 60 - Sliding Roof, Tilting Roof >> WM 600619 Removing And Installing Roof Assembly (Panorama Roof) (All Models) >> Subsequent Work

Subsequent Work

  1. Install roof joint cover strip. → Installing roof joint cover strip
  2. Connect the battery. → WM 9X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY (ALL MODELS)
  3. Close the roof assembly with the emergency operation mechanism and initialise final deactivation.
  4. Read out and erase the fault memories for all systems.
  5. Check roof assembly functions by completely opening and closing or raising it.
  6. Read out the fault memory for the roof assembly and if a fault was entered in the fault memory, carry out a diagnosis using the PIWIS Tester 9718. 
  7. Install headliner. → Installing roof lining