64 - Glazing, Window Control -- 987-BOXSTER-CAYMAN

• WM 641219 Removing And Installing Windscreen (All Models)
  • Tools
  • Preliminary Work
  • General Warning Notes
  • Tools And Materials
  • Removing Windscreen
    • Removing Spacer Blocks
    • Removing Windscreen
  • Preparing Window Frame For Installation
    • Removing Adhesive From The Body
    • Cleaning And Priming Areas That Are Free Of Adhesive Residue Or Have Paint Damage Or Where There Is Newly Built-Up Paint In The Window Aperture Of The Body
  • Preparing Windscreen For Installation
    • Removing Windscreen Seal
    • Removing Adhesive From The Windscreen
    • Fitting Windscreen Seal
    • Marking The Bonding Area
    • Activating The Bonding Section Of The Windscreen
    • Priming The Windscreen
  • Installing Windscreen
    • Preliminary Work Before Windscreen Installation
    • Fitting Windscreen Into The Body
    • Preparing 2-Component Adhesive For Processing
    • Applying Adhesive To The Windscreen
    • Pulling Off Protective Film
    • Inserting Windscreen Into The Body
    • Cleaning Fields Of Vision
  • Subsequent Work
• WM 6412IN General Information On Installing And Removing Car Windows (Except CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition, CAYMAN R)
  • Tools
  • Removing Glass With Cutting Wire Separator
    • Danger Of Injury When Working On Car Windows
    • Material Damage When Removing The Glass From Car Windows
    • Removing Glass With Cutting Device - Wire Separator
    • Applying Protective Film To The Dashboard
    • Guiding Cutting Thread Into The Passenger Compartment
    • Guiding Cutting Thread Into The Gap In The Glass
    • Attaching Cutting Thread To The Body
    • Attaching Cutting Thread To The Spooling Device
    • Installing Spooling Device And Deflection Rollers On The Glass
    • Separating Glass As Far As P1
    • Repositioning Spooling Device
    • Separating Glass As Far As P2
    • Separating Glass As Far As P3
    • Separating Glass As Far As P4
    • Separating Glass As Far As P5
    • Cutting Power When Removing Glass With Cutting Thread
• WM 6412IN Processing Of PORSCHE 2-Component Window Bonding Agents (All Models)
  • Tools
  • Tools And Materials
    • Tools And Materials For Installing Car Windows
  • Pre-Treatment Of Bonding Surfaces
    • Pre-Treating Adhesive Flanges On Vehicle Windows
    • Pre-Treating Adhesive Flanges On Vehicle Body
• WM 641623 Removing And Installing Seal For Windscreen (All Models)
  • Installing Seal For Windscreen
    • Fitting Windscreen Seal
• WM 643719 Removing And Installing Microswitch For Window Opening Controls (All Models)
  • Technical values
  • Preliminary Work
  • Removing Microswitch For Window Opening Controls
    • Unclipping Electric Line For Micro Switches
    • Removing Microswitch For Window Opening Controls
  • Installing Microswitch For Window Opening Controls
    • Notes
    • Clipping In The Electric Line For Micro Switches
  • Subsequent Work
• WM 644015 Adjusting Front Door Window (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R)
  • Tools
  • Technical Values
  • Preliminary Work
  • Adjusting Front Door Window
  • Subsequent Work
• WM 644015 Adjusting Front Door Window (All Models)
  • Tools
  • Technical Values
  • Preliminary Work
  • Adjusting Front Door Window
  • Subsequent Work
• WM 644019 Removing And Installing Front Door Window (All Models)
  • Technical Values
  • Preliminary Work
  • Removing Front Door Window
  • Installing Front Door Window
    • Notes
    • Securing Front Door Window
    • Inserting Door Trim Panel
    • Inserting Door Panel
    • Standardising The Power Windows
    • Blockage Detection Function
    • Precondition For Operation Of The Power Windows
  • Subsequent Work
• WM 644049 Reworking (Coating) Front Door Window (All Models)
  • General Warning Notes
    • Warning Note On Hydrophobic Window
    • Checking Front Door Window
  • Preliminary Work
    • Preparing Components For Processing
    • Cleaning Window Surfaces
    • Reworking (Coating) Front Door Window
• WM 644819 Removing And Installing Front Window Shaft Seal (All Models)
  • Removing Front Window Shaft Seal
    • Removing The Front Window Bay Seal
  • Installing Front Window Shaft Seal
    • Installing The Front Window Shaft Seal
• WM 645219 Removing And Installing Front Power Windows (All Models)
  • Technical Values
  • Preliminary Work
  • Removing Front Power Windows
  • Installing Front Power Windows
  • Subsequent Work
• WM 645419 Removing And Installing Power Window Motor (All Models)
  • Tools
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Power Window Motor
  • Removing Power Window Motor
  • Installing Power Window Motor
  • Subsequent Work
    • Subsequent Work For Window Power Motor
  • Programming Power Window Motor (Door Control Unit)
    • Reading From And Writing To The Power Windows Motor (Door Control Unit)
  • Coding Power Window Motor (Door Control Unit)
    • Coding The Power Windows Motor (Door Control Unit)
• WM 645819 Removing And Installing Switch For Power Windows (All Models)
  • Preliminary Work
  • Removing Switch For Power Windows
  • Installing Switch For Power Windows
  • Subsequent Work
• WM 647519 Removing And Installing Side Window (All Models)
  • Technical Values
  • Preliminary Work
  • Removing Side Window
  • Installing Side Window
  • Subsequent Work
• WM 647619 Removing And Installing Side Window Seal (All Models)
  • Preliminary Work
  • Removing Side Window Seal
  • Installing Side Window Seal
  • Subsequent Work
• WM 648600 Repairing Rear Window (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER SPYDER, CAYMAN R)
  • Preliminary Work
  • Preparing Connection Areas Of The Body For Installing A New Plug-In Contact
  • Fitting plug-in contact and preparing for installation
  • Soldering The Plug-In Contact
  • Subsequent Work
• WM 648601 Checking Function Of Heated Rear Window (All Models)
  • Tools
  • Checking Function Of Heated Rear Window
    • Check With The Temperature Probe
    • Temperature Probe Nr.164 Pos.1
• WM 648619 Removing And Installing Rear Window (All Models)
  • Tools
  • Preliminary Work
  • General Warning Notes
  • Tools And Materials
  • Removing Rear Window
  • Preparing Window Frame For Installation
    • Removing Adhesive From The Body
    • Cleaning And Priming Paint Damage Or Newly Built-Up Paint Areas In The Window Aperture Of The Body
  • Preparing Rear Window For Installation
    • Removing Adhesive From The Rear Window
    • Applying Activator To The Bonding Section Of The Rear Window
    • Fitting Rubber Buffer
  • Installing Rear Window
    • Preparing 2-Component Adhesive For Processing
    • Applying Adhesive On The Rear Window
    • Inserting Rear Window Into The Body
  • Subsequent Work
• WM 6486IN General Information On Removing The Rear Window (All Models)
  • Tools
  • Removing Glass With Cutting Wire Separator
    • Danger Of Injury When Working On Vehicle Windows
    • Removing Glass With Cutting Device - Wire Separator
    • Sticking Adhesive Tape On The Body
    • Using Cutting Thread
    • Guiding Cutting Thread Into The Gap In The Glass
    • Attaching Cutting Thread To The Spooling Device
    • Installing Spooling Device And Deflection Rollers On The Glass
    • Separating Glass As Far As P1
    • Repositioning Spooling Device
    • Separating Glass As Far As P2
    • Separating Glass As Far As P3
    • Separating Glass As Far As P4
    • Separating Glass As Far As P5
    • Cutting Power When Removing Glass With Cutting Thread