LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> Boxster Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 420619 Removing And Installing Rear-Axle Cross Member (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install support plate.

    Installing Support Plate 

    Fig 1: Identifying Support Plate
    G09587547Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install rear underbody panelling.

    INSTALLING COVER FOR REAR UNDERBODY

    Fig 2: Identifying Rear Underbody Cover Components
    G09587548Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Carry out suspension alignment.

    44950300 SUSPENSION ALIGNMENT, COMPLETE

    4400TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT