LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2004 >> 911 GT2 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Equipment - 911 Turbo (996) >> Disassembling And Assembling Pump Unit >> Troubleshooting

Disassembling And Assembling Pump Unit: Troubleshooting

TROUBLESHOOTING CHART - REAR SPOILER HYDRAULIC PUMP

Procedure  Work Instruction  Cause 
1 Possible causes of fault  
2 Drive motor for the pump does not turn Connect battery voltage to the pump. Pump faulty, replace.
Refer to REMOVING PUMP  .
3 Drive motor for the pump turns. Hydraulic cylinders do not move.   Pump faulty, replace.
Refer toREMOVING PUMP  .
4 One hydraulic cylinder does not extend Visual inspection:
-oil loss, visible fluid (Pentosin) on hydraulic cylinder.
Hydraulic cylinder faulty, replace
Refer to REMOVING HYDRAULIC CYLINDER 
5 Hydraulic cylinders do not extend. Visual inspection:
-oil loss, visible fluid (Pentosin) on the pump.
Pump faulty, replace
Refer to REMOVING PUMP 
6 Hydraulic cylinders extend automatically on parked vehicle.   Oil level too high.
Refer to BLEEDING THE PUMP UNIT