Central plug

-A- Coding pin: In the Boxster in opening 2, in the 911 Carrera and 911 Turbo in opening 5. Pin BR opening 6, pin RE/VI opening 3. Refer to Fig 1 .
-B- Slide in lock-in position.

Removing coding pin and pin
See REMOVING FRONT SEAT .
1. Pull slide -B- in -direction of arrow 1- . Refer to Fig 1 .
2. Lever out fuse -arrow 2- with a small screwdriver and remove completely.
3. Pull out coding pin -A- with pliers. Press pin out of flat connector using press-out tool.
  See TOOLS .

Fig 1: Removing Coding Pin And Pin From Central Plug

G03094701

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Removing coding pin and pin
1. Insert coding pin -A- and pin into the flat connector until it engages. Refer to Fig 1 .
2. Insert fuse -2- in -direction of arrow- until it engages.
3. For seat installation: Insert counter plug into vehicle and push in slide -B-. Refer to Fig 1 .