LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for auxiliary headlight (high beam headlight) as from model year '02 >> Installing bulb for auxiliary headlight

Installing bulb for auxiliary headlight

WARNING: This page is about a different variant/trim than selected.
NOTE: See INSTALLING BULBS  .
  1. Engage electrical plug connection -arrow-  .
    2. Fig 1: Engaging Electrical Plug Connection & Installing Bulb Holder Into Headlight Housing
    G03063620Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Guide the bulb holder into the headlight housing and turn clockwise on the left headlight and counter-clockwise on the right headlight. Ensure correct seating.
  3. Put the cap -1-  into position and press down until both locking tabs -B-  engage. Screw in both fastening screws -A-  . Tightening torque: 4 Nm (3 ftlb.).
    Fig 2: Installing Cap, Engaging Locking Tabs & Screwing In Fastening Screws
    G03063621Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Install main headlight and perform a function test.
scientia non olet · About LEMON Manuals