LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Convertible Top, Hardtop) >> Replacing convertible-top frame - for convertible top covering with glass window, as of MY 2003 >> Test and adjusting values

Test and adjusting values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TEST AND ADJUSTING VALUES

Designation Dimension Note
Adjusting the roll-over bar with the convertible-top frame in the body -A-  799 +/- 1 mm Oblique dimension is measured from centre of threaded bore for sash guide mount to centre of convertible-top pin housing (centre of lower edge) -Arrow- 
-B-  39 +/- 1 mm Measured from centre of threaded bore for sash guide mount to top edge of rear side section. See ADJUSTING THE ROLL-OVER BAR .
scientia non olet · About LEMON Manuals