Test and adjustment values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Illustration of the gap dimensions
- Refer to DIAGRAM - GAP DIMENSIONS, HARDTOP .
TEST AND ADJUSTMENT VALUES (1 OF 2)
| Designation | Dimension | Note |
|---|---|---|
| Drive lever to the side part sealing channel (body) | 195 +/- 0.5 mm | Adjust convertible top gear synchronously on left and right. See ADJUSTING CONVERTIBLE TOP GEAR . |
| Hook of convertible top lock to windstop | 5 mm | Minimum distance |
TEST AND ADJUSTMENT VALUES (2 OF 2)
| Designation | Dimension | Note | |
|---|---|---|---|
| Rear lid to convertible top compartment lid | -H- | 6-0.5 mm | Rear cover only lowered |
| Side section to convertible top compartment lid | -I- | 6-.05 mm | Convertible top compartment lid only raised (max. 2 mm) |
| Side section to convertible top compartment lid | -J- 6-0.5 mm | Convertible top compartment lid only raised (max. 1 mm) | |
| Side section to convertible top compartment lid | -M- | 4.5 +/-1 mm | Convertible-top compartment lid only raised (max. 1 mm) Determine gap |
| Function test: | Open and close convertible top with the rocker switch. When opening and closing the convertible top, the gap dimension -1- between the hook of the convertible top lock and the windstop must be adhered to. If necessary, correct by screwing the ball socket -1- | ||